Skip to content

GrimmSpeed Black Top Mount Intercooler Kit 2002-2007 WRX / 2004-2021 STI

SKU GRM090024
Current price $663.17
$663.17 - $663.17
Current price $663.17
Original price $799.00
Original price $799.00 - Original price $799.00
Original price $799.00
Save 17% Save 17%

EMISSIONS

Carb sema both icons

CARB Certified - EO - #D-896-4 & #D-896-2 for listed fitments

The bar has been raised.

So, you probably already know that you want an intercooler with maximum cooling and minimum restriction, but when it comes to selecting the right one for the job, we think it’s important to understand why. As air is pressurized by your turbo, it heats up, not because of the heat of the turbocharger, but because of it being compressed, the atoms in the air are forced closer together and as a result, move faster and have more energy. That energy manifests itself as heat. The more heat we can remove from the system, the denser the air becomes and that’s what helps eliminate pre-detonation, or ‘knock’, allowing for increased output from your system. Your OEM TMIC does just fine at stock boost under normal use, but as soon as you start putting some real heat into it with higher boost or harder use, it heat-soaks beyond recovery.

QUICK SPECS

  • Smooth End Tank Internal Contours - Designed for maximum flow
  • Machined Throttle Body Connection - Tight, leak and trouble-free seal
  • Machined Flange Faces and Internal Bores - Maximum pressure-tightness and unrestricted flow
  • Permanent Mold End Tank Tooling and Casting - Allows much tighter tolerances and higher strength
  • Stainless Steel Threaded Inserts - Prevent cross-threading or damaged threads
  • High-Density, High-Flow Core - Optimizes heat transfer and minimizes flow restriction for turbo Subarus
  • Cleaned, Inspected and Sealed Prior to Shipping - Prevent Engine Damage Due To Foreign Matter
  • Includes GrimmSpeed Inlet and BPV Gaskets - The best in the industry!

DESIGN

There are two primary considerations in the design of an intercooler: maximum heat transfer and minimum pressure drop. Unfortunately, one causes the other, so finding a perfect balance requires a detailed understanding of the intended application, some serious engineering power and the highest quality manufacturing processes. Fitment and quality are also critically important to ensure that the most safety-critical part of your turbo system is up to the task every time your foot hits the floor. We began by laser scanning an OEM TMIC to plot the mounting points and space claim in CAD with pinpoint accuracy. At the same time, we designed a custom bar and plate core with overall dimensions, fin density and fin types that would provide the insane heat transfer area we require with minimal flow restriction. With core size nailed down, we got to work designing end tanks that offered smooth flow, perfect fitment and even distribution of the hot charge air through the core. Countless revisions were tested in flow simulation before we finally found exactly the characteristics that we wanted. From there, 3D printed prototypes were used to confirm fitment and we began work on manufacturing details in preparation for verification testing and production.

CORE

The core of any top mount intercooler is the beating heart of the beast. The intercooler cools your hot charge air in two different ways. The first is by reducing temperature by transferring heat from your hot, compressed air by conduction through the fins of the intercooler. The second is from a small pressure drop due to the flow restriction in the fins. The idea when you’re selecting an intercooler is to find one that results in an overall increase in air density. Rather than designing the largest possible core, or the core with the highest possible fin density, we created a well-rounded unit that’s designed specifically for Subaru’s making up to 550whp. That said, this particular core flows over 1500CFM and will support up to 575whp before it’s likely that a FMIC might be better suited for your system.

END TANKS

In our pursuit of perfection (there’s that p-word again), we learned a great deal about aluminum casting. If you’ve done similar research, you know that every aftermarket end tank that you’ve handled was cast from a one-time-use mold made of re-used sand. Not our style. In typical GrimmSpeed fashion, we stepped outside of the box and explored other options. We quickly learned that we had stepped into big boy territory. I’ll let the photos do most of the talking, but here’s the scoop. To achieve the quality, tight tolerances, pressure tightness and strength that we required, permanent mold casting became our only option. Each and every end tank is cast from the same CNC machined mold, ensuring not just dimensionally-perfect castings with an amazing surface finish, but also excellent repeatability. With this method, we have perfect control over both the internal and external contours of each casting. After casting, every single mating surface is precision machined for a leak-free finish and unbeatable fitment. We will not be outdone.

ASSEMBLY

We designed tabs to be laser cut and CNC bent from 5052 aluminum, selected for its ductile nature, to ensure that the bending and welding processes don’t compromise their integrity. These will accept your stock TMIC bushings and offer plenty of adjustability for tweaked brackets and ‘creative’ turbo setups. After each component has been inspected, our welders hand TIG each and every assembly. From there, each assembly is pressure tested to 50psi and is thoroughly cleaned before it’s sealed up and prepared for shipping.

PERFORMANCE

Performance is a difficult subject when discussing a top mount intercooler that can be used in many different systems, often times with different goals. For that reason, we’ve opted to use primarily stock-turbo cars running higher boost. This particular 2.0l TD04 car is running full exhaust (catted), a GrimmSpeed EBCS and a 19psi tune. First, we tested pressure drop to ensure that our aggressive core design didn’t negate its benefits with a massive pressure drop. The graph below shows boost pressure in the inlet and outlet end tanks, as well as the calculated pressure drop and a trendline. Because of sampling rates and the nature of the pulsing system, you’ll notice that there is a great deal of noise in the pressure drop measurements. What’s important is the trend and as you can see, the maximum recorded pressure drop is just above .2psi with an average of around .1psi. Data was collected using a DATAQ DI-148U sampling a pair of ProSense pressure transmitters at 240Hz. Next, we tested inlet and outlet temperatures using a pair of K-type thermocouples and high frequency multimeters. What we found is that with a stock turbo, the OEM WRX TMIC seemed to keep up OK until 5000rpm or so. At that point, the efficiency of the OEM TMIC drops off very quickly. As we continued doing pulls, performance of the OEM TMIC degraded very quickly and the GrimmSpeed TMIC refused to budge, no matter how much heat we put into it. The graph below shows the post-IC temperatures for the GrimmSpeed TMIC vs. OEM TMIC. Note that these pulls were both completed after the same warm-up procedure (a series of shorter pulls) but before the OEM TMIC was fully heat soaked (and just about useless). Lastly, the third graph shows the calculated efficiency for these two top mounts based on temperatures taken from the same two pulls. This graph shows that even before it’s heat-soaked, efficiency of the OEM TMIC begins to drop significantly after 3800rpm.

INSTALLATION

Because of our dedication to providing an excellent, well-rounded product, you’ll find that with the proper y-pipe, the GrimmSpeed TMIC will install with ease. We designed the TMIC to work with your stock STI y-pipe. Don’t have one? No problem. We’ve also designed a cast aluminum y-pipe kit with a 4-piece 5-ply silicone couplers and t-bolt clamps for each and every connection (not included). Worried that your hood scoop splitter might not feed your GrimmSpeed TMIC with the air it needs to properly keep those outlet temps low? We thought you might, so we’ve also designed a lightweight splitter that’s optimized for our TMIC as well as whatever scoop you might have. Check out the TMIC Splitter Product Page to learn more about the five fitments and how even STI owners will benefit from the upgrade.

INCLUDED

  • GrimmSpeed Top Mount Intercooler
  • GrimmSpeed Bypass Valve Gasket
  • GrimmSpeed STI TMIC Y-Pipe Gaskets (Pair)
  • 36-inch Long 1/2" PCV Hose
  • 1/2" Tee Fitting
  • 1/2" Hose Connector
  • 4x Black M8x1.25-18mm Y-Pipe Bolts
  • 2x M8x1.25-25mm Bypass Valve Bolts
  • GrimmSpeed Stencil

COMPATIBILITY

2002-2007 WRX

2004-2021 STI

  • 5 stars: 4 (67%)
  • 4 stars: 2 (33%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
C
Chinda
Best TMIC on the market

For anyone looking for a tmic for your 2015-2021 Subaru WRX and where to pick one up. Just buy it here at WRX daily.
Great price very fast shipping and the best customer service you can get! Very easy to install and a great fit. You can install it in about 1 hour!! I gave it a 4 Star because the push bulb trim for the hood/inter-cooler shroud was way to big it kept on falling off. It wasn't WRX daily fault, it was packaged like that from Grimmspeed. I contacted Grimmspeed and still waiting for a response almost 3 weeks now.. I just had to do some modifications to make it work.. I want to thank Justin and the team for helping me get the parts I needed and sent it to me very fast!! WRX Daily will be my new go to shop, for all my car parts!!!

L
Lester
It’s an intercooler

Nice upgrade to stock, build quality is dialed in. All the welds are done well and the finish clean. Install was very easy. I have not experienced any heat soak but haven’t had the chance to push the limits just yet. Waiting on a few parts to finish my build and a final tune. Happy with my purchase.

C
Cris Domantay
This is the one

First of all customer service is top notch🙏, thank you for helping me returned a previous TMIC. Grimmspeed TMIC is very easy to install, tooked me less than 10mins. Quality is superb, been driving my vb for 3 days now without a tune. I noticed increased of 2 psi, increased throttle responds and decreased of air temperature of 20 according to my Cobb AP. Scheduled a tune in two weeks, hopefully it will get a full potential out of it.

C
Canyon Rider
5 Stars with upgraded tune

So I added this with a CatBack exhaust and got some great flow. I had the tune updated and picked up a solid difference. It is a nice well made product and arrived promptly. I am very happy with my purchase.

C
Canyon Rider
Very nice product - May need some tuning if not stock.

I added this (and only this) to a Cobb Stage 1 setup with an axle back. The combo of the two flows WAY too much for the Cobb Stage 1 tune. I am doing a pro tune on it now and am expecting good results. I am not there yet. It may work in isolation but with anything else you will need to tune.

I will update and the results should be good but be careful if you have any other mods.

Thank you for your review! You're correct, although not required, it is definitely recommended to get a tune after the installation of a TMIC to maximize the benefits of the upgrade. We hope that the pro-tune makes your review of the GrimmSpeed TMIC a 5/5!

J
Johnny D
Grimmspeed--Top Notch

I coupled this with a few other Grimmspeed parts for the intake tract. Super nice construction,good fit. When you get with your tuner,look at your logs and notice how fast this thing drops intake temps when you get into boost. Worth every cent!
On a footnote--it came missing the lower splitter. Got in touch with Grimmspeed Cust Svc. Great people! Fixed me up quickly. Good products and great service!